Home » Products » Wireless Telemetry » T24-BC1
Email

T24-BC1

Battery Charger for T24 Acquisition Modules

T24_BC1_4d83446ab262a.jpg
Download product tech sheet
To view in your browser: Left-Click on the icon. To save: Right-Click on icon / Save Target As
  • Charger module for lithium battery for use with T24 acquisition modules
  • Provides 3.3V regulated output
  • Same footprint as T24 acquisition modules
  • Charges from 5VDC supply (Ideal for USB)

This module is a battery charger and power supply suitable for the T24 range of telemetry acquisition modules.

From a 5 Volt supply the module produces a regulated 3.3V for the acquisition module and can also charge a suitable Li-ion Battery.

 

Supply Voltage
4.1 to 6 Volts
Regulated Voltage Output
3.3 V
Battery Positive Connection
3.7 V
Maximum Cable Length
150mm
Dormant PCB Current
1.7μA

* 07/02 gauge wire attached to maximum load i.e. T24-SA with four 350 Ohm strain gauges.
Note: LED will only be lit when an input voltage is applied.

Battery Options

Varta LIP653450

 

Rated Capacity

1100mAh

Dimensions

35 x 54 x 7mm

Weight

20g

Charge Time

3hrs @ 466mA

Battery Life T24-SAi & e

1 month 25 days*

Varta LIC18650

 

Rated Capacity

2200mAh

Dimensions

18.25 Diameter 65mm Height

Weight

46g

Charge Time

4.5hrs @ 466mA

Battery Life

3 months 20 days*

UBC 581730

 

Rated Capacity

250mAh

Dimensions

18 x 31.5 x 5.8mm

Weight

6.5g

Charge Time

2hrs @ 133mA

Battery Life

7 days*

* Note: Battery life is calculated with a T24-SA running in low power mode with a sample time of 5mS and transmit interval of 333mS for 2 hours out of every 8 hours, to a 1k Ohm bridge.