Model LCA20

The LCA15 has been redesigned to become the LCA20 taking advantage of new technology with improved performance and increased functionality. The external appearance and dimensions of the LCA20 remains the same as the LCA15. In addition to the introduction of a new microprocessor and using the latest RISC technology, the LCA20 has many new features such as the selection of device parameters via a PC or keypad rather than using the traditional on-PCB switches. RS485 and RS232 digital data output for communications and printing Factory calibration in mV/V 6 wire input to compensate for barrier and cable losses 2 set points SPCO relay outputs 10 pt linearization 3 x configurable digital inputs e.g. for auto tare, peak hold and reset […]

Read More...

PSD

The PSD strain gauge indicator or load cell hand held display combines the high performance digitizing capabilities of the model DCell with the convenience of a hand held display and keypad. This digital weighing indicator is able to make use of the full precision of the 7 digit LCD display also has peak hold, valley (trough) hold and display hold facilities. Power is provided by two AA batteries, with long life due to the intelligent power saving features designed in to the product. Making an ideal load cell display having TEDS auto calibration built in. The housing is sealed to IP65 and carry case options are also available. Non linearity (% FR) 0.001 – 0.001 Internal resolution (bits) 24 Resolution at […]

Read More...

Model UAB

The UAB universal input digital signal conditioner & controller is a very flexible digital signal conditioning system. Presented in an OEM modular PCB format, for use with a wide range of sensors and transducers, including volts, amps, temperature, frequency, speed, load, force, pressure, torque, LVDT, RVDT and many more. The digital architecture of the UAB offers very easy one-pass calibration and fast setup. This digital signal conditioning amplifier offers options of local or remote LCD display, isolated analogue outputs, latching relays or digital outputs for control or alarm functions. The RS232 or RS485 options provide for digital communications (including setup) and can support label or ticket printers.

Read More...

Model TTA

Sensitivity (mV/V) 0.5 to 30 (set by resistor, fine adjustment by trimpot) Excitation 8VDC Analogue Output 10V Mounting Circuit board 55mm x 43mm Power Supply 15V DC Bandwidth 2KHz Features Alarm Conditions: Power failure, bridge open/short circuit, excitation failure.

Read More...

Model SMW-HR

The High Resolution 24-Bit Bulkhead Mounted Strain Gauge Indicator SMW-HR has the same features as the but with a very high resolution (24-bit) A-D converter of 500,000 counts.  It is optimised for single or multiple load cell and weighing applications. The SMW-HR is ideal to use in multi-range scales and for applications where the live weight is very small in relation to the dead weight (tare weight). The 24-Bit Bulkhead Mounted Strain Gauge Indicator has a 4 point linearisation capability and its 6-wire measurement system can compensate for zener barrier losses. The digital architecture offers very easy one-pass calibration and fast setup. This versatile digital load cell amplifier offers options of isolated analogue outputs, latching relays or digital outputs for control […]

Read More...

Model SMW

The Bulkhead Mounted Strain Gauge Indicator SMW is a very flexible digital indicator with a wide range of input options and analogue and digital outputs.  It comes in a bulkhead mounting format, optimised for single or multiple load cell and weighing applications providing 10V 160 mA excitation for up to 6 load cells. It has digital and communications output options plus various plug-in options and a wide range of power supplies. The RS232 or RS485 output options allows for digital communications (including setup) and can support label or ticket printers.  The bulkhead mounted strain gauge indicator has fully isolated 4-20mA and 0-10V analog outputs. The digital architecture offers very easy one-pass calibration and fast setup. This versatile load cell indicator offers options […]

Read More...

Model SMP

The Bulkhead Potentiometer Indicator SMP is a flexible indicator designed for temperature, 0-10 V, 4-20 mA, speed and potentiometer readings for use with a wide range of sensors and transducers, including volts, amps, temperature, frequency, speed, load, force, pressure, torque, LVDT, RVDT and many more. It offers a very fast and simple one-pass calibration and quick setup. This versatile device offers options of isolated analogue outputs, latching relays or digital outputs for control or alarm functions. The RS232 or RS485 options provide for digital communications (including setup) and can support label or ticket printers. For a panel mount or DIN rail mount version of the SMP, see model Versatile Indicator /Controller For a wireless telemetry version, see models and Radio Telemetry Display Module. Input […]

Read More...

Model SGA

The AC or DC Powered Strain Gauge Amplifier can provide excitation for up to 4 x 350 ohm strain gauge bridge sensors.  This high-performance signal conditioner is AC or DC powered and can be used with multiple strain gauge bridge sensors such as load, force, pressure and torque. It offers a wide bandwidth and wide input signal range.  Plus, it has a very stable bridge excitation, selectable sensitivity, and high frequency filtering with user-selectable analogue outputs. Conditioned output signal can be selected from 0-20mA, 4-20mA, 0-10V, 0-5V, ±5V or ±10V. Options include: Isolated DC supply, DIN rail mount and OEM module. The robust AC or DC Powered Strain Gauge Amplifier SGA is supplied in a waterproof IP67 NEMA4 bulkhead mountable case […]

Read More...

Model RCA

The Rack Mounted Load Cell Amplifier RCA15 is a very flexible 19″ rack mount digital signal conditioner amplifier for single or multiple strain gauge bridge applications (load cell, force, pressure, torque), offering very easy one-pass calibration and fast setup. This versatile signal conditioning amplifier offers options of local LCD display, isolated analogue outputs, latching relays or digital outputs for control or alarm functions and in-flight compensation for filling applications. Sensitivity (mV/V) 0.5 to 200 Excitation 10VDC at 1.4A for each rack. Display Resolution 1:19,999 or none (model dependant). Analogue Output 0-10V and 4-20mA per module. Mounting 19 rack mount with 8 or 12 modules Power Supply 110/240V AC Options Relay alarms, RS232/485.

Read More...

Model PSD-232

The handheld load cell display with RS232 interface is a 7 digit LCD display with battery, peak, trough, net, overload and shunt cal indication.  It allows the connection from the strain gauge or load cell handheld display to many devices i.e a PC or simple data logger. It has a simple robust construction and is sealed to IP65 suitable for most applications.  Plus it comes fitted with an 8 pin connector which enables users to connect the handheld load cell display with RS232 with appropriate cabling for their application. 2 Separate Engineering Units The handheld load cell display with RS232 can read and indicate 2 separate engineering units of measure such as kgs/lbs. An annunciator indicates which range has been selected and […]

Read More...