Model LCB

Intelligent Load Cell Amplifier

Download product tech sheet
To view in your browser: Left-Click on the icon. To save: Right-Click on icon / Save Target As

All parameters as the LCA15 (page 15) but without surface mount case. Circuit board is Eurocard size.

The LCA15 intelligent Strain Gauge amplifier offers both 4 to 20mA and 0 to 10V analogue outputs from any standard strain gauge input. Designed primarily as controllers for weighing operations, the LCA15s have a wide range of application.

Ease of calibration and setting of the analogue output range make the unit extremely user-friendly. Set-up is via a simple hand-held or on-board programmer/display. Auto Tare and Peak Hold (if set) on the analogue output are operated via voltage-free contacts closures.

  • Simple one pass auto calibration
  • Excitation 10V 160mA for up to 6 Load Cells
  • Sensitivity from 0.5 to 200 mV/V
  • 6 wire input to compensate for barrier and cable losses
  • Full digital set-up and calibration using keypad or PC
  • Auto tare and peak hold actioned by volt-free contacts
  • Fully isolated 4-20mA and 0-10V analog outputs
  • 2 Setpoints SPCO relay outputs
  • RS485 RS232 Digital data output for communications and printing
  • PCB (LCB shown in main photo) options include various cases with or without DIN rail mounting
Sensitivity (mV/V)
0.5 to 200.0
10VDC nominal (drives up to 6 350 ohm cells)
Display Resolution
19,999 (Display optional)
Analogue Output
Simultaneous 0-10V and 4-20mA
Surface mount ABS case sealed to IP65
Power Supply
Selectable 110 VAC, 240VAC
Relay alarms, RS232/485, 12 or 24 VDC power