Category: Load Cells

High accuracy single point load cell models SP40 and SP41 are low profile single point load cells designed for direct mounting of low-cost weighing platforms. Their small physical size, combined with high accuracy and low cost, makes these load cells ideally suited for retail, bench and counting scales. Available in anodized aluminium these high accuracy single point load cell models are approved to NTEP and other stringent approval standards, including OIML R60. For hazardous environments, this load cell has EEx ia IIC T4 level of approved option. An optional special humidity resistant protective coating assures long term stability over the entire compensated temperature range. The two additional sense wires feed back the voltage reaching the load cell. Complete compensation of […]

Low profile single point load cell model SP22 is a high accuracy low profile single point cell designed for direct mounting in low-cost weighing platforms. Its small physical, combined with high accuracy and aluminium construction, makes this the low-cost cell ideally suited for retail, bench and counting scales where savings in parts and labour due to simpler construction can be made. This single point load cell is easy to mount and has a protection rating of IP66 dust-tight with protection from high-pressure water jets from any direction. Capacities (Kg) 3, 5, 7, 10, 15, 20, 30, 35 Grade E, G, F, C3 OIML Approval TC 2792 Platform Size 350mm square max Cable 0.5m 4-core single floating screen Construction Aluminium Sealing […]

Whenever several load cells are built into a scale or platform, some flexibility must be introduced into the mechanical design to allow for expansion (due to temperature) and the bending and twisting of the frames under load. If not, forces will be created between the individual load cells which could cause significant measurement errors. Typically, to overcome this, expensive ball & cup mechanism or lever/knife edges have traditionally been used. A simple, more cost-effective alternative is to use a type of elastomer (rubber) bearing. An elastomer bearing typically consists of two metal plates which are held together by a layer of vulcanised neoprene rubber. The SF-SB51T Self Aligning Load Cell Foot is a type of elastomer bearing. For platform applications, […]

Welded Shear Beam Load Cell Model SB51 provides the weighing industry with the ultimate protection necessary for today’s hostile environments in an economical low profile range suitable for platform scale manufacture. Its low profile and all-welded sealing, combined with high accuracy makes this load cell ideally suited for low profile platforms, pallet truck weighers, tanks and silos. The guide slots incorporated into the upper and lower mounting faces enable manufacturers to easily position the load cell. Hermetically sealed against moisture, the construction of the welded shear beam load cell model SB51 in combination with a polyurethane dual shielded cable, enables continuous operation in harsh environments while maintaining a high operating specification. The two additional sense wires feed back the voltage […]

Model SB41 is a low profile shear beam load cell designed for high accuracy platform scales, pallet scales and process weighing applications. It has high immunity to shock or side loading and is available in 2 or 3mV/V sensitivity. Approved to OIML, NTEP standards. For hazardous environments, this load cell is available with EEx ia IIC T6 level of European approval. Nickel plating and full environmental sealing assures long term reliability. A stainless steel option is available for the lb versions for use in harsh or corrosive environments. The shear beam load cell has two additional sense wires feed back the voltage reaching the load cell. Complete compensation of changes in lead resistance due to temperature change and/or cable extension […]

The bending beam mount EZ-Mount weigh modules are designed for maximum accuracy coupled with a high degree of resistance to the adverse effects of overload and sideload forces. Each module consists of a bending beam transducer packaged in a rugged stainless steel mounting system. Specifically designed for use on low capacity process vessels, modules meet IP68 and NEMA 6 immersion requirements and mechanically resist high overload and sideload forces. Built-in load adaption technology automatically compensates for vessel thermal expansion and contraction. A substantial protection plate, positioned above the cable entry gland, prevents damage from plant debris and traffic. Simplified bolting patterns expedite both retrofit and new vessel installations. The EZ bending beam mount can be fully installed without the load […]

Welded Bending Beam Model CB55 is IP68 hermetically sealed against water ingress, has a robust stainless steel construction and polyurethane shielded cable, making it ideal for harsh environments. Thanks to its low profile and high accuracy this Welded Bending Beam load cell lends itself perfectly to low profile platforms, weighing and packing machines, conversion of mechanical scales and variety of other applications where sealed cells are required. We can provide this load cell with EEx ia IIC T6 level of approval as an option, for hazardous environments. The two additional sense wires feed back the voltage reaching the load cell. Complete compensation of change in the lead resistance due to temperature change and/or cable extension, is achieved by feeding this voltage into […]

The MA-CLC20 Silo Mount is specifically designed to use with our Low Profile Bending Ring Load Cell CLC20.  It is used for the support of tanks, silos, and hoppers. Thanks to its simple, compact and heavy gauge steel robust construction it is ideal for indoor or outdoor process control applications when high accuracy weighing is  a must.  An earth strap with fixing bolts is also provided. The Silo Mount is designed to support a uniformly distributed load and is capable of tilting through a maximum of ±3° from vertical. For a faster installation the Silo mount provides a jacking support system enabling the mount to be installed in the raised position without the need for the load cells.  This also […]