Industrial Wireless Transmitter Enclosure

Get a Quote

Download the Datasheet


  • Sealed IP67 water-proofed enclosure for T24 acquisition modules
  • Allows for easy connection to sensor/load cell
  • Provides battery holder and PSU for external power supply
  • Easy connectivity with 2 part screw terminals
  • Can provide battery backup to an external power supply
  • Up to 800m range
  • Supplied as case only and requires acquisition modules

Product Details

The industrial wireless transmitter enclosure T24-ACM module is a rugged IP67 protection rated enclosure for any of the T24 acquisition modules.  It is the largest in our range of wireless enclosures.  It provides a battery holder and simple screw field terminals for easy wiring to a variety of sensors.

It can be powered from either the 2 x high capacity Alkaline D cell batteries or from an external supply, thanks to its regulator circuitry. In case of power failure the batteries will act as a backup power supply.

A wireless range of up to 800m is possible in an open field site, with the T24 wireless telemetry.

The modules are factory calibrated to 2.5 mV/V which can be custom user calibrated and linearised over up to 9 points by using the downloadable T24 Toolkit for high accuracy.

The low noise measurement electronics deliver high resolution and low drift results. 

The unit is supplied without the Acquisition Module (see T24-SA Strain, T24-VA Voltage, T24-IA Current). Upon ordering, it is recommended the ‘external’ antenna type (SAe, VAe, IAe) should be chosen to take advantage of the antenna supplied within this module.

If you require a smaller industrial wireless enclosure please see our T24-ACMi miniature wireless industrial enclosure which has a protection rating of IP67 or our miniature wireless enclosure T24-ACMm which is the smallest in the wireless enclosure range and has an IP50 protection rating.

Battery Supply Voltage
2.5 to 3.6V DC
IP Rating
Operating Temperature Range
-10 to +50°C
-10 to 50°C
Relative humidity
0 to 95 %RH
Data Type
250 K bits/sec
Integral Antenna
100 (325) Metres (feet)

T24-ACM Industrial Wireless Transmitter Enclosure Outline Drawing

T24-ACM Industrial Wireless Transmitter Enclosure Outline Drawing
T24-ACM Industrial Wireless Transmitter Enclosure Outline Drawing


    For further information on this product contact us on 0118 981 7339 or fill in the form below.

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.