Display Module for DCell Digital Load Cells

Download product tech sheet
To view in your browser: Left-Click on the icon. To save: Right-Click on icon / Save Target As

Display Module for DSC/DCell Digital load cells (RS485 input).

The DS485DIS is an LED display for direct connection of up to eight (8) DSC or DCell load cell aquisition devices.

There are 3 display modes:

  • Item Mode: To display any 1 of 8 inividual sensor inputs with option of gross net on each sensor.
  • Summation Mode: To display the summation of up to 8 inputs. with Gross net ans individual values
  • Arithmetic Mode: To display the result of Add, Subtract, Multiply or Divide of individual sensor inputs.

This display can connect to various RS485 DSC and DCell devices. Such as DSC4SMAN, DSC4HMAN, DLCSMAN and DLCHMAN. The DSC and DLC devices must have sequential station numbers from 1 to the total number of devices. The default baudrate is 115200.

  • Sealed to IP65
  • 3 year Warranty
  • Bulkhead mounted


Supply Voltage
Nominal 8 to 18V
Current Consumption
Nominal 200mA max
Communications Module Communications Bus
RS485 8 data bits, 1 stop bit, no parity
Configuration Bus
RS232 8 data bits, 1 stop bit, no parity
Storage Temperature
- 20 to +70ºC
Operating Temperature
-10 to 50ºC
Relative Humidity
95% maximum non condensing