Display Module for DCell Digital Load Cells

Get a Quote

Download the Datasheet


  • 6 Digit Display for use with DCell or DSC Digital Load Cells
  • Connection for up to 8 DSC or DCells
  • Can Sum up to 8 Sensor Inputs
  • Removes the need for DSC or DCell to be Permanently Connected to a PC or PLC
  • Toggle Buttons for Ease of Use
  • Sealed to IP65
  • 3 year Warranty
  • Bulkhead mounted
  • Free Instrument Explorer Software

Product Details

The RS485 load cell display module DS485DIS is designed specifically to use with the DSC and DCell, with an RS485 input.

This 6 digit 20mm LED display can connect up to eight (8) DSC or DCell.

Display Modes of the RS485 Load Cell Display

There are 3 display modes of the RS485 load cell display module – item mode, summation mode and arithmetic mode.

  • Item Mode: Displays any of the 8 individual sensor inputs with the option of gross net on each sensor.
  • Summation Mode: To display the summation of up to 8 inputs along with Gross net and individual values.
  • Arithmetic Mode: To display the result of Add, Subtract, Multiply or Divide of individual sensor inputs.

This display can connect to various RS485 DSC and DCell devices. Such as DSC4SMAN, DSC4HMAN, DLCSMAN and DLCHMAN. The DSC and DLC devices must have sequential station numbers from 1 to the total number of devices. The default baudrate is 115200.

Supply Voltage
Nominal 8 to 18V
Current Consumption
Nominal 200mA max
Communications Module Communications Bus
RS485 8 data bits, 1 stop bit, no parity
Configuration Bus
RS232 8 data bits, 1 stop bit, no parity
Storage Temperature
– 20 to +70ºC
Operating Temperature
-10 to 50ºC
Relative Humidity
95% maximum non condensing


    For further information on this product contact us on 0118 981 7339 or fill in the form below.

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.