Category: Load Cells

The i100 Portable Strain Gauge Simulator has an accuracy of 0.03% and generates precise mV/V signals to help develop, troubleshoot, and calibrate strain gauge signal conditioners, instruments, signal processors, and data loggers. It is very compact and compatible with AC carrier or DC strain gauge signal conditioner electronics. The Portable Strain Gauge Simulator has an Accuracy of 0.03%, temperature effects are 6 ppm/F, and zero balance is 0.0004 mV/V. Resistance of the i100  Portable Strain Gauge Simulator is equivalent to a 350-ohm bridge. The i100 has 8 switch selectable output steps. Plus, the provided vernier knob enables the user to continuously adjust the output from 2 to + 2 mV/V where necessary. A convenient switch provides true reverse polarity. Connection to the […]

The Lebow Load Cell Overload Protector is available with an optional end plate assembly and rod ends. The Overload Protector eliminates downtime and replacement costs due to damaged strain gauge load cells. The unit does not appreciably affect the cells dynamic response. Up to its set point (usually 110%), the application of load results in linear deflection of the system. At 110% of rated load, the patented non-linear spring supporting the cell abruptly collapses, shunting the load in excess of 110% to the built-in mechanical stops. When the load is removed, the springs automatically return to their original position. The low spring rate, above rated load, allows wide tolerances in mechanical stop settings. Available for Models 3397, 3167, 3132, 3169 […]

Model RM, with male threads, is a high output rod end load cell designed to be mounted inline to the load axis to measure tension. The outputs for these load cells are ±5 Vdc or 10 Vdc, or 4 mA to 20 mA (two wire) all calibrated in tension. The mounting thread configurations and the all welded stainless steel construction make these tension load cells ideal for a variety of rugged field applications as well as in the laboratory. The optional high output signal offers resistance to electrical noise as well as additional signal resolution. Additional options include an internal buffered shunt calibration circuit for ease of setup with an associated indicator, and a variety of thread selections, including metric […]

Female Threaded Rod End Load Cell model RF measures a range of between 2000 lb to 200000 lb with a ±5 Vdc or 10 Vdc, or 4 mA to 20 mA (two wire) high output.  Its in-line design makes it ideal to measure tension in-line to the load axis. Thanks to its mounting thread configurations and all welded stainless steel rugged construction the Female Threaded Rod End Load Cell is perfectly suited for use in both tough field applications and laboratory environments. Additional Options for the Female Threaded Rod End Load Cell Optional high output signal – provides additional signal resolution and resistance to electrical noise. Optional internal buffered shunt calibration circuit – offers simple setup and calibration with indicator. Variety of […]

The integral Load Button Load Cell Model 43 is a low profile “pancake” type load cell using bonded foil, strain gauges to measure loads from 2.3 to 223,000 kg (5lb to 500,000lb). This load cell measures in compression only and has a fixed integral load button. For a pancake load cell without the integral load button please see .  The integral Load Button Load Cell gives high performance in non-linearity, hysteresis, and repeatability specifications for such applications as tube mills, extruding processes and weighing. Options The Load Button Load Cell can be hermetically sealed for applications where water vapour must be prevented from entering the load cell. Model 41 load cells are available with optional 0 Vdc to 5 Vdc or 4 mA […]